Diy sofa bed – Creating a slipcover for your sofa can revitalize it, without cost or effort reupholstering. Slipcovers are wonderful opportunities for redecorating on a budget, protects delicate or light-colored fabric, or to create a new look for your home when you are not sure you want that new look to be permanent. Measure the couch with a tape measure, measuring from the lowest to the highest point on the couch, and the couch width. A good equation to use when determining how much food to buy for your slipcover: multiply the height of the sofa with 2 and width by 4, so add these numbers together. Divide this number by 36 and you will get the number of meters of fabric you need to buy.
Buy double the substance you certainly would you need from diy sofa bed yardage equation described above, especially if you’ve never made a slipcover before. There will inevitably be some mistakes and you might want to create a matching pillow or two, then you will be pleased to have this extra fabric later.
Hang a large piece of cloth over the couch, tucking in some of the substance (by about 3 inches to spare) under the back of the seat cushions and then let the fabric over the top of the diy sofa bed and cut the fabric about an inch longer than when it reaches the floor to make room for a wide edge. Needle hemline and under-the-pillow line to indicate where you will have to sew.